Pincer Grasp - Page 2 of 13

Cotton Balls Music

Have the children sit in a circle.

Give each child a clothespin and a cotton ball.

Instruct the children to pick up and drop the cotton ball on the lap of the child sitting to their right when the music starts.

When the music stops, each child should pick up his cotton ball using the clothespin and raise their hand.

You can make it into a game by giving an additional cotton ball to a child who raised their hand but did not have a cotton ball caught on his clothespin.

The child with the least number of cotton balls at the end of the game wins.

Game Variations:

Instead of using a clothespin, you might want to use tongs or tweezers.
If you are playing with 1 child, you may want to just use one cotton ball and see who has it when the music stops.
After a few times passing the cotton balls to the right, switch and have the passing go left.

Tactile Bowl

Blow up the balloon 1/4 way.

You may tie a knot or tape the tip of the balloon to hold the air in.

Have the child cut the yarn into long strips.

In a bowl, help the child mix the glue and water together until you get a viscid mixture.

Ask the child to dip the strips of yarn in the glue mixture and then use it to wrap around the balloon, starting from bottom to top (the child might need help with the bottom part where the yarn should be rolled tightly).

Encourage the child to use a pincer grasp (tip grasp) to take the yarn pieces out of the mixture.

Continue until the balloon is 3/4 covered in yarn. Allow to dry, then pop the balloon and take it out.

To make the bowl colorful, use different colors of yarn.

Nuts and Bolts Tripod Grasp

Provide the child with different sizes of nuts and bolts.

Ask the child to pick up a nut and a matching bolt then screw them together.

Construction Paper Guitar

Using a large piece of cardboard or construction paper, draw the shape of the guitar’s body. If the child is able to draw it by himself, allow him to do so. Otherwise, let the child trace your drawing, using a thick marker.

Ask the child to cut out the shape, following the lines. Depending on the child’s skill level, make the line thicker, and provide support as needed. Once the child cuts out the guitar’s shape out, ask him to draw or trace a circle in the middle of the guitar’s body. You can use a round object to help with drawing an accurate shape.

Instruct the child to cut out the circle, providing support as needed.

Using a single hole puncher, carefully have the child punch three holes on either side of the circle he just cut. Using 3 rubber bands, ask the child to cut through them so they are now one long string.

Instruct the child to thread each rubber band across 2 parallel holes, and tie on each end. Provide support as needed for tying the rubbers in place.

Using another piece of cardboard or construction paper, ask the child to draw or trace a rectangle. Instruct the child to cut it out, and use the glue and tape to attach it to the top part of the guitar’s body. To make the guitar look more life like, ask the child to draw lines continuing from the bands up the stem of the guitar.