Markers - Page 24 of 50

Heavy Foil Rock Decorate

Steps:

Tear off a sheet of aluminum foil. Encourage your child to use both hands to tear the resistant foil into a large, manageable piece.
Use maximum hand force to crumple and squeeze the foil tightly. Form a dense, hard 3D rock shape (the ‘foundation’). Squeeze hard for heavy work input.
Place the finished foil rock securely onto the piece of cardboard base. This acts as a stable work surface.
Use the glue bottle to squeeze several small, controlled dots of liquid glue onto the foil rock surface.
Pick up one dry bean using a precise pincer grasp (thumb and pointer finger).
Carefully aim the bean at a wet glue dot. Press the bean firmly onto the resistant foil surface. Repeat until the foil rock is covered in textured dots.

Safety Tip:
Constant and direct adult supervision is required. Dry beans and small, dense foil pieces pose a significant choking hazard for children who still place items in their mouths. Ensure materials are used only as intended.

Heavy Anchor Cup Clip

Steps:

Use markers to decorate 4 or 5 paper cups. Draw colorful faces or stripes on the outside.
Place the heavy bean bag flat onto a stable surface like a table or the floor.
Ask your child to press down firmly on the bean bag with their helper hand to stabilize it.
Use the dominant hand to pick up a clothespin. Squeeze it open using a strong finger pinch.
Aim the open clothespin and clip one paper cup onto the side of the resistant bean bag. The bag should hold the cup securely.
Repeat the squeezing and clipping action until all the decorated cups are attached to the heavy anchor.

Safety Tip:
Constant and direct adult supervision is required. Clothespins and small pom-poms (if used) are small objects. They pose a potential choking hazard for children who still place items in their mouths.

Foil Rod Twist Connect

Steps:

Tear off a piece of aluminum foil slightly larger than an index card.
Place the card on the foil. Wrap the card tightly and squeeze hard to form a dense, stiff foil rod.
Use a marker to draw a narrow slit (about 1.5 inches long) onto a separate index card. (Adult step: Carefully cut the slit using scissors).
Hold the slotted card firmly steady with your helper hand on the table.
Pick up the foil rod. Aim the end at the slit and use a continuous twisting motion to screw the rod through the resistant opening.
Twist the rod all the way through the slot to connect the two cards. Repeat to build a creative 3D foil sculpture!

Safety Tip:
Constant adult supervision is required. Adults must handle the scissors for preparation. Ensure the child compresses the foil tightly into dense balls or rods to avoid sharp edges. Collect all small foil pieces immediately after play.

Twist and Drill Wall Work

Steps:

First, use the masking tape to secure a piece of sturdy cardboard vertically onto a stable wall or door at your child’s chest height.
Press a large, thick lump of Theraputty or stiff playdough firmly onto the center of the vertical cardboard. This is your resistant drill target.
Hold the craft stick like a pencil. Encourage your child to use their helper hand to stabilize the cardboard next to the putty.
Aim the craft stick at the putty. Use strong finger pressure and a twisting motion to ‘drill’ the stick deep into the resistant putty.
Switch directions and twist the stick the opposite way to pull it out. Repeat this drill motion, filling the putty surface with holes.
Try putting all the sticks in, then pull them out. See how fast you can twist and drill all the sticks into the target!

Safety Tip:
Constant and direct adult supervision is required. Theraputty (or playdough) and craft sticks are small objects and pose a significant choking hazard for children who still place items in their mouths. Ensure materials are used only as intended.

Felt Roll & Clip Match

Steps:

Use markers to draw a simple dot on one felt strip and a matching dot on one index card.
Place the felt strip flat. Roll the felt tightly around the pencil to create a dense, resistant cylinder.
Remove the pencil carefully while holding the felt roll firmly with your helper hand to keep the shape.
Pick up the paper clip using a strong pincer grasp (thumb and index finger).
Slide the paper clip onto the felt cylinder to secure the roll. This requires effort and focus.
Set the finished felt scroll onto the Index Card that has the matching marker dot. Repeat for all felt strips.

Safety Tip:
Constant and direct adult supervision is required. Small paper clips and felt scraps pose a potential choking hazard for children who still place objects in their mouths. Ensure all materials are collected immediately after play.