Scissors - Page 21 of 48

Felt Piercing Garden Push

Steps:

Use markers to draw 5 to 7 small target dots randomly across the center of the felt piece.
Cut the felt into a square shape. Use masking tape to secure the felt tightly over the container opening, making sure the fabric is taut and resistant.
Ask your child to hold the container firmly steady with their helper hand on the table to prevent tipping.
Pick up one craft stick. Grip it with a strong pincer grasp (thumb and pointer finger).
Aim the stick at a marked target dot. Use a strong, controlled push to pierce the stick straight through the resistant felt.
Repeat this powerful pushing action until all the marked dots are filled with sticks, completing your ‘felt garden’.

Safety Tip:
Constant adult supervision is required. Ensure the child pushes the craft sticks into the container and away from their face and body. The stabilizing hand should always be placed on the container base.

Foil Rod Twist Connect

Steps:

Tear off a piece of aluminum foil slightly larger than an index card.
Place the card on the foil. Wrap the card tightly and squeeze hard to form a dense, stiff foil rod.
Use a marker to draw a narrow slit (about 1.5 inches long) onto a separate index card. (Adult step: Carefully cut the slit using scissors).
Hold the slotted card firmly steady with your helper hand on the table.
Pick up the foil rod. Aim the end at the slit and use a continuous twisting motion to screw the rod through the resistant opening.
Twist the rod all the way through the slot to connect the two cards. Repeat to build a creative 3D foil sculpture!

Safety Tip:
Constant adult supervision is required. Adults must handle the scissors for preparation. Ensure the child compresses the foil tightly into dense balls or rods to avoid sharp edges. Collect all small foil pieces immediately after play.

Layered Cardboard Pin Weave

Steps:

Prep the surface by taping two Index Cards tightly together. Secure this layered card firmly onto a piece of Cardboard using Masking Tape.
Use a Marker to draw 8 to 10 small target dots across the layered card. Ensure the targets are spaced out.
Challenge your child to hold the cardboard base steady with their helper hand to stabilize the work area.
Pick up one Q-Tip using a strong pincer grasp. Aim the Q-Tip at a target dot.
Use a strong, controlled push to pierce the Q-Tip completely through the resistant layered cards and into the cardboard base. This takes effort!
Once all dots are pierced, gently remove the Q-Tips. Pick up a stiff Pipe Cleaner and thread it through the newly created holes to weave a colorful pattern.

Safety Tip:
Constant and direct adult supervision is required. Q-Tips and cut pipe cleaner pieces are small materials and pose a potential choking hazard for young children. Adults should manage the scissors for preparation.

Foam Spike Pom-Pom Insert

Steps:

Secure the foam sheet firmly onto a piece of construction paper using masking tape. This stabilizes the work surface.
Use a marker to draw 10 to 15 short, straight lines (these are your ‘spike’ targets) randomly across the foam sheet’s surface.
Challenge your child to hold the foam steady with their helper hand. Use child-safe scissors to snip along each drawn marker line. Squeezing through the resistant foam requires strong effort!
Pick up one pom-pom using a precise pincer grasp (thumb and pointer finger).
Carefully aim the soft pom-pom at one of the newly snipped slits. Use controlled force to push the pom-pom halfway into the slit, turning the foam into a colorful, spiky cushion.
Repeat this inserting action until the entire foam surface is covered in pom-pom ‘spikes’.

Safety Tip:
Constant and direct adult supervision is required when using scissors. Ensure that the child uses the scissors only for cutting the foam. Small pom-poms are used in this activity and pose a potential choking hazard for young children. Collect all small materials immediately after play.

Tight Coil Tunnel Twist

Steps:

Adult Prep: Cut an index card in half. Cover one half completely with aluminum foil, crimping the edges tightly underneath. Secure this foiled card flat onto a sturdy piece of cardboard using masking tape.
Use a marker tip or pen to poke 5-6 small starter holes into the foil surface. These holes should be slightly smaller than the pipe cleaners.
Encourage your child to twist the pipe cleaners tightly around their finger or a pencil to create small, dense, stiff coils. This builds hand strength!
Ask your child to hold the stable cardboard base firmly steady with their helper hand (proximal stability).
Pick up one finished coil with a strong pincer grasp (thumb and pointer finger). Aim the coil at a starter hole.
Use a strong, continuous twisting motion (like screwing in a lightbulb) to turn the coil. Screw the stiff coil into and through the resistant foil and cardboard base until it is fully embedded. Repeat until all holes are filled.

Safety Tip:
Constant and direct adult supervision is required. Pipe cleaners are small materials and, especially when cut or tightly coiled, pose a choking hazard for children who still place objects in their mouths. Collect all pieces immediately after play.