Sequencing - Page 5 of 7

Slot & Stitch Sculpture

Steps:

Prepare the structure ‘parts’ by cutting several index cards into different shapes (squares, rectangles, triangles). Then, cut small, narrow slots (about 1/4 inch deep) into the edges of each card. (Adult help required for cutting slots.)
Challenge your child to connect the slotted cards by sliding them into each other to create a 3D structure, like a tall building, a bridge, or a fun abstract sculpture.
Using the hole puncher, encourage your child to punch several holes around the edges of the assembled structure. Remind them to hold the structure steady with one hand while squeezing the puncher with the other to strengthen their grasp.
Give your child long pieces of yarn. Demonstrate how to weave the yarn through the punched holes to ‘stitch’ the structure together, reinforcing the corners and decorating their sculpture with color.

Safety Tip:
Always supervise the use of child-safe scissors. Yarn and small pieces of index card can pose a choking hazard for children who still mouth objects; ensure all pieces are kept away from the mouth.

Crumple Pin Bowling

Steps:

Build the ‘Crumple Pins’: Give the child 6 to 10 paper rolls (like toilet paper or paper towel rolls). Encourage them to use both hands to crumple each roll tightly into a dense, firm ‘pin’ shape. Secure each crumpled shape firmly with small pieces of masking tape to ensure they hold their structure.
Set up the Lane: Use masking tape to mark a ‘foul line’ on the floor. Arrange the crumpled pins in a triangle formation 5 to 10 feet away from the line (adjust distance based on space and skill level).
Bowl: Challenge the child to stand behind the line and roll the ball toward the pins, focusing on aiming and grading the force of their roll to knock down as many pins as possible.
Score and Reset: Count how many pins were knocked down. Encourage the child to reset the pins (sequencing and motor planning) before taking their next turn.

Safety Tip:
Ensure the bowling area is clear of furniture, toys, and other trip hazards. Encourage children to reset the pins safely without rushing or running.

Color Drop Towers

Steps:

Prepare the ‘towers’: Press a large lump of playdough firmly into the bottom of a Paper Cup or container. Flip the cup upside down so the playdough forms a stable base on the outside top.
Insert 6-8 Golf Ball Tees into the playdough base, blunt end first, so the narrow, hollow end points straight up (these are the ‘towers’ that need filling).
Create the colors: Fill several small bowls or Paper Cups with water and add a few drops of different Food Coloring to each one.
Show your child how to hold the eyedropper using their thumb and pointer finger (pincer grip) to suck up the colored water, reminding them to squeeze slowly for control.
Challenge your child to aim the dropper directly over one of the empty tee towers and release one drop of liquid at a time, slowly filling the narrow space. Try mixing colors by dropping red, then blue, into the same tower to watch them blend!

Safety Tip:
Always supervise closely. Ensure the child understands that the golf tees and playdough are not for eating or placing near the face.

Stick Flag Thread

Steps:

Use markers to color the craft sticks in three different colors (e.g., red, blue, green).
An adult should cut the paper roll into 3-inch sections. Use a hole puncher to create 6 to 8 holes randomly around each section.
Help your child take index cards and draw a matching colored dot on each one. Cut a small slit into the center of each card (these are your flags).
Challenge your child to hold the paper roll steady with their helper hand. They use their other hand to thread a colored stick straight through one of the holes.
Once the stick is threaded, they must find the matching colored index card flag. Ask them to slide the flag onto the exposed end of the stick.
Continue threading sticks and matching flags until the entire paper roll is covered in colorful flags!

Safety Tip:
Adults must handle the scissors and hole puncher during preparation. Supervise the activity to ensure the child does not put the craft sticks near their eyes or mouth.

Styro-Dart Challenge

School-age boy aiming a pipe cleaner dart at a Styrofoam target to practice wrist extension, shoulder strength, and ocular control in a home playroom.

Steps:

Help your child draw a bullseye target on the Styrofoam block using markers. Assign different point values to the rings (e.g., 50 points for the center, 10 points for the outer ring).
Transform the pipe cleaners into ‘darts.’ Have your child fold one end into a small, easy-to-grip loop (the handle). Tightly curl the opposite end into a sharp spiral or point that will stick into the Styrofoam.
Set up the target using the cardboard as a stand/easel. Have your child stand 3 to 5 feet away. Emphasize holding the dart so their wrist is slightly bent back (extended) for better control before aiming.
Challenge your child to toss the pipe cleaner darts at the target, trying to grade their force (proprioception) so the dart sticks in without bouncing off. Keep track of points for a fun competition!

Safety Tip:
Ensure the children stand far enough apart if multiple children are playing. Supervise to ensure the pipe cleaner ‘darts’ are only thrown at the designated Styrofoam target and not toward faces or other objects.