Sequencing - Page 6 of 11

Resistance Stick Tangle

Steps:

Adult Prep: Use scissors to cut several 18-inch strips of yarn. Tightly wrap each yarn strip around a craft stick until only the ends are exposed.
Secure the wrapped yarn tightly to the craft stick using small, strong strips of masking tape. Press the tape down hard for maximum resistance.
Place all the secured, tangled sticks into the plastic container. Decorate the container using markers.
Sit stably at a table. Use your helper hand to hold the container firmly steady to keep it from tipping.
Use your working hand to grip the exposed end of one craft stick with a strong pincer grasp.
Challenge yourself to pull the stick straight up and out of the resistant yarn tangle. Feel the effort! Drop the rescued stick into a pile.
Repeat this process until all the sticks have been successfully pulled free from the tangle.

Safety Tip:
Constant and direct adult supervision is required. Small pieces of yarn and masking tape pose a potential choking hazard for children under five. Ensure the child uses materials only as intended.

Precision Tube Drop

Steps:

Adult Prep: Cut a 4-inch wide strip from the foam sheet. Roll the strip tightly to create a narrow, stable tube, securing the seam firmly with masking tape.
Secure the bottom of the foam tube vertically onto the construction paper using plenty of masking tape. The paper acts as a base.
Place the sticks in the container next to the base. Ask your child to sit stably and use their helper hand to hold the base firmly.
Challenge your child to pick up one craft stick using a neat pincer grasp (thumb and pointer finger).
Encourage them to aim carefully and drop the stick straight down through the narrow opening of the foam tube without touching the sides.
Repeat this precision task until all the craft sticks have been successfully dropped into the tube.

Safety Tip:
Constant and direct adult supervision is required. Craft sticks are small items and pose a potential choking hazard for children who still place objects in their mouths.

Q-Tip Basket Weave

Steps:

Use a marker to draw 10 to 12 dots evenly spaced around the top of the container lid. An adult should use the hole puncher to create a tight hole at each dot.
Place the container on a stable table. Hold the container firmly with your helper hand to keep it from moving.
Use your working hand to pick up a Q-Tip using a neat pincer grasp (thumb and pointer finger). Push the Q-Tip straight into a hole until it sticks out slightly on the inside.
Repeat this process until all holes are filled, creating a standing Q-Tip fence around the lid.
Give the child a long piece of yarn or string. Tie a knot on the starting Q-Tip.
Challenge them to weave the yarn over the first Q-Tip and under the next one. Continue weaving in this over-under pattern all the way around the fence. Pull the string tight to reinforce the basket structure.

Safety Tip:
Q-Tips and yarn are small objects that pose a choking hazard. Constant and direct adult supervision is required throughout this activity. Adults should handle the scissors and hole puncher during preparation.

Twist Cap Treasure Drop

Steps:

Place the buttons in a plastic container next to the empty bottles.
Challenge your child to hold one bottle tightly with their helper hand to stabilize it on the table.
Use the working hand to twist the cap off the bottle completely. Encourage smooth forearm rotation (twisting).
Pick up one button using only the thumb and pointer finger (pincer grasp).
Carefully drop the button into the narrow opening of the bottle. This requires strong aim and distal finger control.
Once the button is inside, pick up the cap and twist it firmly back onto the bottle using the opposite rotation. Make sure it is tight!
Repeat this entire sequence of twist-off, drop-in, and twist-on until all the buttons are delivered into the bottle.

Safety Tip:
Buttons are small, hard objects. Constant and direct adult supervision is required throughout this activity, as they pose a choking hazard for children under five.

Cardboard Clip Sculpture

Steps:

First, draw several straight lines or large shapes onto the cardboard using a marker.
Challenge your child to use both hands to tear the cardboard along the drawn lines. Encourage strong pulling and pressing action for maximum heavy work input.
Place the paper clips into the plastic container next to the workspace.
Take two torn cardboard pieces. Hold them together firmly with your non-dominant (helper) hand to keep them steady.
Use your dominant hand to squeeze open a paper clip using a neat pincer grasp (thumb and index finger).
Clip the paper clip onto the edges of the two cardboard pieces to connect them securely. Continue adding pieces to build a chain or a free-standing sculpture.

Safety Tip:
Constant adult supervision is required. Ensure that the child handles torn cardboard edges carefully, as they can sometimes be sharp. Collect and store all small paper clips immediately after the activity.