Kernel Cannon Wall

Kernel Cannon Wall

Steps:

  • Mix the playdough with a little water in the container until it forms a thick, sticky sludge. Stir in a handful of corn kernels to make the mixture highly resistant.
  • Secure the piece of cardboard vertically onto a stable wall or door using masking tape. Use markers to draw a large, simple target shape on the board.
  • Hold the eyedropper (or baster) with a strong pincer grasp (thumb and pointer finger). Squeeze the bulb hard to suck up the resistant kernel sludge mixture.
  • Hold the cardboard steady with your helper hand to keep the surface stable. Aim the loaded dropper at the marker target.
  • Squeeze the dropper forcefully to shoot the kernel sludge onto the target. Encourage maximum effort! Repeat this action until the target is completely covered.

Safety Tip:
Constant and direct adult supervision is required. Playdough and corn kernels are small objects and pose a significant choking hazard for children who still place items in their mouths. Ensure the mixture is used only as intended.

Foil Grip & Transfer

Foil Grip & Transfer

Steps:

  • Pour water into a small bowl. Add a drop of food coloring to make it a fun color.
  • Drop the cotton balls into the colored water until they are fully soaked and heavy. Place the wet balls inside the Aluminium Foil Pan.
  • Hold the foil pan firmly steady with your helper hand to keep it stable on the table.
  • Use the tongs to pick up one heavy, wet cotton ball at a time. Encourage your child to squeeze the tongs hard to grasp the slippery material.
  • Carefully lift the wet cotton ball and transfer it to the empty plastic container. Drop it inside the target.
  • Repeat this squeezing and transferring action until the foil pan is completely empty. Count how many successful transfers were made!

Safety Tip:
Constant and direct adult supervision is required. Small cotton balls can be a choking hazard if ingested. Ensure the child only handles the materials with the tongs or fingers and keeps them away from their mouth.

Wet Sponge Weight Weave

Wet Sponge Weight Weave

Steps:

  • Fill the container with water and soak the sponge fully. Wring it out hard so it is damp and dense, then press it firmly back into the container base.
  • Adult Prep: Tie one bead securely onto the end of a 12-inch piece of yarn. Tie the opposite end of the yarn onto the middle of one craft stick.
  • Challenge your child to hold the container firmly steady with their helper hand to stabilize the base on the table.
  • Using the working hand, aim the craft stick tip at the sponge. Use a strong, controlled push to drive the stick and the attached yarn/bead completely through the resistant sponge.
  • Pull the stick back out, feeling the resistance and drag of the yarn as it comes through the wet sponge. Repeat this push and pull action until your child tires.

Safety Tip:
Beads and yarn are small materials. Constant, direct adult supervision is required to ensure these items are not ingested, as they pose a choking hazard.

Sponge Edge Clip Match

Sponge Edge Clip Match

Steps:

  • Soak the sponge completely in water until it is heavy and dense. Wring it out slightly so it is damp, not dripping.
  • Place the damp sponge firmly inside the plastic container to keep it stable on the table.
  • Use markers to color the base of the clothespins with 3 to 4 bright colors (e.g., red, blue, green).
  • Draw small, matching colored dots around the thick perimeter of the damp sponge, spacing them out evenly.
  • Ask your child to hold the container steady with their non-dominant (helper) hand to stabilize the base.
  • Pick up a colored clothespin. Encourage them to squeeze it open using a strong finger pinch.
  • Carefully clip the pin onto the sponge edge, matching the colored pin to the colored dot target. Continue clipping until all the dots are covered.

Safety Tip:
Clothespins are small objects and pose a significant choking hazard for children who still place items in their mouths. Constant and direct adult supervision is required throughout this activity. Ensure the child only handles the materials as intended.

Resistant Yarn Unravel

Resistant Yarn Unravel

Steps:

  • Press a large lump of firm playdough onto the heavy block to create a dense base.
  • Wet a long piece of yarn slightly to increase the friction and resistance.
  • Tightly wrap the damp yarn all the way around the playdough-covered block. Leave a small yarn tail sticking out.
  • Place the wrapped block on a stable table. Hold the base firmly steady with your helper hand.
  • Use your working hand to pinch the yarn tail with a strong pincer grasp.
  • Pull the yarn steadily and forcefully to unravel it from the resistant playdough anchor.
  • Repeat the wrapping and unwrapping process to continue the heavy work challenge.

Safety Tip:
Constant and direct adult supervision is required. Yarn and playdough are small objects. They pose a choking hazard for children who still place items in their mouths. Ensure the child maintains a stable seated position while pulling.