Glue - Page 9 of 17

Paper Chain

Setup: On several different colors of construction paper, use a thick marker to draw straight lines spaced about 1 to 1.5 inches apart across the width of the paper.

Steps:

Practice Scissor Grasp: Hand your child child-safe scissors. Encourage them to hold the scissors with their “thumb up” toward the ceiling.
Cut the Strips: Ask your child to cut along the thick marker lines you drew. Remind them to hold the paper steady with their “helper hand” while their cutting hand moves the scissors.
Make the First Loop: Take one cut strip. Show your child how to place a small dot or swipe of glue on one end of the strip. Curl the strip around to meet the glued end, pressing firmly to create your first circle.
Connect the Chain: Take a new strip of a different color. Thread this new strip through the center of your first completed circle loop.
Glue and Repeat: Once the new strip is threaded through, glue its ends together to lock it into the chain. Continue this process—thread, then glue—until all the strips are used!

Pincer Penguin

You will need black, white, and orange-colored pom-poms to create the body, head, wings, beak, and feet of the penguin.

Instruct the child to glue 1 large black pom-pom and 1 large white pom-pom together. This will be the body of the penguin.

Glue 2 small sized black pom-poms to the body. These will be the wings.

Glue 2 small-sized orange pom-poms to the other side of the body. These will be the feet.

Instruct the child to take a medium-size black pom-pom and glue a small-sized orange pom-pom on it. This will the beak.

Glue 2 wiggle eyes above the beak. This will be the head of the penguin.

Glue the head of the penguin to the body.

Acorn Stamper

Draw an acorn on the construction paper (see images for example) or you can let the child trace an acorn stencil to promote fine motor control and visual-motor skills.

Let the child cut the acorn shape using scissors.

Using a piece of small sponge instruct the child to pinch it and dip it into the paint then stamp and paint the bottom part of the acorn cut out. You can also use q-tips or cotton balls to paint.

Encourage the child to fill in the entire bottom part of the acorn.

Have the child spread glue on the top part of the acorn.

Provide the child with a few dry leaves. Instruct the child to crumble the leaves inside the palm of his hand and then spread them on the glue. This will promote finger strength and finger translation.

You may also use beans to cover the top area of the acorn.

Rainbow of Skills

For this activity, you will need to use a red, yellow, orange, green, blue, and purple construction paper.

Draw a line in the middle of the paper plate and have the child cut along the line you drew. Using the pen, draw 5 curves, spaced 1-inch from each other.

Draw a vertical line on each of the construction papers, making a 1-inch strip. Ask the child to cut along the lines you drew. Before the child tears the strips, ask him to arrange the strips in the correct order of the colors of the rainbow.

Have the child tear each strip into pieces. Encourage him to use both hands and tear the pieces from top to bottom. If you want to work more on scissors skills or visual-motor skills, you can draw lines on the strips (straight, crocked or curved) and have the child cut along the lines you drew.

Finally, have the child glue the small pieces onto the paper plate, using the curved lines you drew to place the colors in the correct order.

Fine Motor Marble Maze

In this activity, we create a marble maze to promote fine motor skills.

Start by gluing the straws on the cardboard. You will need to glue each straw on the opposite side as follows:

Glue the 1st straw aligned to the left edge of the cardboard
Glue next straw aligned to the right side of the cardboard
Keep gluing straws all the way to the bottom of the cardboard
Make sure to create a space for the marble to go through between the straws
The end result should look like this:

Let the glue dry.

We used a gallon size zip lock bag but you can use a smaller zip lock bag to create a smaller maze.

At the bottom edge of the zip lock bag, cut a small slit. Make sure you cut it on the side the marble will come out from.

Once the glue is dry and the straws are secured, insert the cardboard into the ziplock bag.

Close the ziplock bag almost all the way, leaving a small opening for the marble to fit in.

Put the marble through the opening and start moving it with your finger through the maze until it comes out at the bottom.

You can alternate the fingers you use to move the marble or you can use both hands to hold the cardboard and move it from side to side, letting the marble slide out.