Precision Tube Drop

Precision Tube Drop

Steps:

  • Adult Prep: Cut a 4-inch wide strip from the foam sheet. Roll the strip tightly to create a narrow, stable tube, securing the seam firmly with masking tape.
  • Secure the bottom of the foam tube vertically onto the construction paper using plenty of masking tape. The paper acts as a base.
  • Place the sticks in the container next to the base. Ask your child to sit stably and use their helper hand to hold the base firmly.
  • Challenge your child to pick up one craft stick using a neat pincer grasp (thumb and pointer finger).
  • Encourage them to aim carefully and drop the stick straight down through the narrow opening of the foam tube without touching the sides.
  • Repeat this precision task until all the craft sticks have been successfully dropped into the tube.

Safety Tip:
Constant and direct adult supervision is required. Craft sticks are small items and pose a potential choking hazard for children who still place objects in their mouths.

Foil Sticker Peel

Foil Sticker Peel

Steps:

  • Tear off a sheet of aluminum foil. Lay it flat on the table and smooth out the wrinkles.
  • Use markers to draw 10 to 12 small circles randomly across the foil surface. These are your sticker targets.
  • Place a few small stickers (dot stickers work best) onto the plastic container lid. Press them down firmly so they are hard to peel.
  • Ask your child to hold the container steady with their helper hand. Use the tweezers to grasp the edge of a sticky sticker.
  • Peel the sticker off the container lid against the resistance. This requires controlled, strong force.
  • Carefully carry the sticker over the foil and use the tweezers to press the sticker onto a marker circle. Repeat until all stickers are placed.

Safety Tip:
Due to the small size of the stickers and tweezers, constant and direct adult supervision is required. These materials are choking hazards for children who still place objects in their mouths.

Sponge Stick Rotation

Sponge Stick Rotation

Steps:

  • Fill the bowl with water. Soak the sponge completely. Ask your child to wring the sponge out tightly, making it damp and dense.
  • Place the damp, dense sponge firmly inside the plastic container to keep it stable on the table.
  • Hold the container steady with your helper hand. Pick up one craft stick using a comfortable grasp with your working hand.
  • Aim the flat end of the stick at the sponge. Use a strong, twisting motion to screw the stick halfway into the resistant sponge.
  • Continue twisting all the craft sticks into the sponge until the surface looks like a prickly cushion.
  • Challenge your child to reverse the movement: use a strong twist and pull to remove the sticks one by one. Try switching hands for stabilization.

Safety Tip:
Constant adult supervision is required. Ensure the child remains seated while working and only uses the craft sticks for the intended twisting action.

Tension Tube Push

Tension Tube Push

Steps:

  • First, an adult should use the scissors to cut 5 to 7 short, tight slits (about 1 inch long) across the surface of the paper roll.
  • Help your child take a large piece of playdough and push it firmly into the center of the paper roll. The playdough should be dense and resistant, covering the slits from the inside.
  • Place the paper roll on a table. Challenge your child to hold the paper roll steady with their helper hand to prevent it from moving while pushing.
  • Pick up a pipe cleaner from the container. Encourage your child to aim the pipe cleaner tip at one of the narrow slits.
  • Use a strong, steady push to insert the pipe cleaner completely through the slit and into the resistant playdough core. The playdough holds it in place.
  • Continue pushing the pipe cleaners into all the slots until the entire ‘tension tube’ is full. Then, try pulling them out for an extra workout!

Safety Tip:
Constant and direct adult supervision is required. Pipe cleaners and pieces of playdough are small objects and pose a potential choking hazard for children under five. Ensure the child only pushes the pipe cleaners into the designated tube.

Taut String Barrier Push

Taut String Barrier Push

Steps:

  • An adult should cut a sturdy rectangle from the cardboard. Use markers to draw a simple picture on the cardboard, like a big car or boat.
  • Wrap several lengths of string or yarn tightly across the cardboard surface. Crisscross the strings both horizontally and vertically to create a resistant ‘gate’ barrier over the picture.
  • Secure the ends of the string firmly with tape on the back of the cardboard. Ensure the strings are taut and resistant.
  • Place the yarn gate barrier flat on a table. Ask your child to hold the cardboard firmly with their helper hand to keep it stable.
  • Pick up one craft stick. Challenge your child to use the stick to push and weave straight through the resistant yarn gate until the stick is completely past the barrier.
  • Encourage strong, controlled pushes. Repeat the process to push all the sticks through the resistant strings and fill the picture.

Safety Tip:
Constant and direct adult supervision is required. Craft sticks and small pieces of tape or string are small objects. They pose a choking hazard for children under five.