Masking Tape - Page 10 of 24

Moving Target Delivery

Steps:

Adult Prep: Use masking tape to secure the paper cup firmly onto the outside of the large ball. This cup is the moving target.
Place the buttons in the container nearby. Set the moving target ball on the floor in a clear, open space.
Ask your child to pick up one button using a strong pincer grasp (thumb and pointer finger).
Gently roll or move the ball slowly across the floor. Encourage your child to walk or squat as they follow the target.
Challenge your child to aim carefully and drop the button into the narrow opening of the paper cup while the ball is moving slowly.
Repeat the process: pick up a button, chase the moving target, and deposit the item inside. Encourage them to try different body positions, like kneeling or squatting, while aiming.

Safety Tip:
Constant and direct adult supervision is required. Buttons are small, hard objects and pose a choking hazard. Ensure the playing area is clear to prevent tripping while the child moves with the ball.

Felt Tapestry Push

Steps:

Adult Prep: Use scissors to cut 8 to 10 tight, narrow, horizontal slits into the felt sheet.
Secure the felt tightly onto the cardboard using masking tape on all edges. Tape the cardboard base firmly onto the table.
Take two pipe cleaners and twist them tightly together to create one stiff, thick ‘needle’ for threading.
Hold the cardboard base steady with your helper hand. Use a strong pincer grasp to pick up the end of the stiff pipe cleaner needle.
Challenge your child to thread the pipe cleaner straight through one tight felt slit. Push it completely through, feeling the resistance of the fabric.
Continue threading the pipe cleaner into the remaining slits, creating a dense, woven tapestry pattern across the felt surface.

Safety Tip:
Constant adult supervision is required. Pipe cleaners are small materials and pose a potential choking hazard for young children. Ensure all materials are used only as intended.

Precision Tube Drop

Steps:

Adult Prep: Cut a 4-inch wide strip from the foam sheet. Roll the strip tightly to create a narrow, stable tube, securing the seam firmly with masking tape.
Secure the bottom of the foam tube vertically onto the construction paper using plenty of masking tape. The paper acts as a base.
Place the sticks in the container next to the base. Ask your child to sit stably and use their helper hand to hold the base firmly.
Challenge your child to pick up one craft stick using a neat pincer grasp (thumb and pointer finger).
Encourage them to aim carefully and drop the stick straight down through the narrow opening of the foam tube without touching the sides.
Repeat this precision task until all the craft sticks have been successfully dropped into the tube.

Safety Tip:
Constant and direct adult supervision is required. Craft sticks are small items and pose a potential choking hazard for children who still place objects in their mouths.

Resistant Card Weave Pull

Steps:

Ask an adult to cut 8 to 10 index cards into thick, uniform strips (about 1 inch wide).
Weave the strips together tightly in an over-under checkerboard pattern to create a square ‘mat’.
An adult should securely wrap masking tape around the entire perimeter of the woven square. Wrap the tape tightly to keep the weave stable and add resistance.
Place the finished woven card square flat on a stable table. Challenge your child to hold the square firmly steady with their non-dominant hand (the helper hand).
Encourage your child to use their working hand to grasp the edge of one woven strip and pull it straight out of the resistant tape frame.
The pulling requires strong, controlled force. Continue pulling the strips free until the entire woven piece has been unraveled. Drop the rescued strips into the container.

Safety Tip:
Constant and direct adult supervision is required. Adults should handle the scissors during preparation. Ensure the child remains seated stably when performing the strong pulling motions.

Ribbon Resistance Unwind

Steps:

Adult Prep: Cut several strips of ribbon (about 12 inches long). Secure one end of a ribbon strip firmly onto a craft stick using a small piece of masking tape.
Adult Prep: Tightly wrap the ribbon all the way down the stick until it is completely covered. Secure the loose end of the ribbon/stick assembly firmly inside the plastic container with more masking tape (this anchors the stick).
Have your child sit at a table and hold the plastic container steady with their helper hand to prevent it from sliding. This requires proximal stability.
Challenge the child to use their working hand to pinch the exposed end of the ribbon. Encourage them to use a strong, controlled pull and unwind motion to free the ribbon from the stick.
Once the ribbon is completely unwound, gently peel the starting tape off the stick and wrap a new ribbon tightly around the stick to play again.

Safety Tip:
Ribbon and small pieces of masking tape are small objects. Constant adult supervision is required to prevent choking hazards for children in this age group.