Grasp - Page 19 of 36

Resistant Card Weave Pull

Steps:

Ask an adult to cut 8 to 10 index cards into thick, uniform strips (about 1 inch wide).
Weave the strips together tightly in an over-under checkerboard pattern to create a square ‘mat’.
An adult should securely wrap masking tape around the entire perimeter of the woven square. Wrap the tape tightly to keep the weave stable and add resistance.
Place the finished woven card square flat on a stable table. Challenge your child to hold the square firmly steady with their non-dominant hand (the helper hand).
Encourage your child to use their working hand to grasp the edge of one woven strip and pull it straight out of the resistant tape frame.
The pulling requires strong, controlled force. Continue pulling the strips free until the entire woven piece has been unraveled. Drop the rescued strips into the container.

Safety Tip:
Constant and direct adult supervision is required. Adults should handle the scissors during preparation. Ensure the child remains seated stably when performing the strong pulling motions.

Q-Tip Basket Weave

Steps:

Use a marker to draw 10 to 12 dots evenly spaced around the top of the container lid. An adult should use the hole puncher to create a tight hole at each dot.
Place the container on a stable table. Hold the container firmly with your helper hand to keep it from moving.
Use your working hand to pick up a Q-Tip using a neat pincer grasp (thumb and pointer finger). Push the Q-Tip straight into a hole until it sticks out slightly on the inside.
Repeat this process until all holes are filled, creating a standing Q-Tip fence around the lid.
Give the child a long piece of yarn or string. Tie a knot on the starting Q-Tip.
Challenge them to weave the yarn over the first Q-Tip and under the next one. Continue weaving in this over-under pattern all the way around the fence. Pull the string tight to reinforce the basket structure.

Safety Tip:
Q-Tips and yarn are small objects that pose a choking hazard. Constant and direct adult supervision is required throughout this activity. Adults should handle the scissors and hole puncher during preparation.

Foil Rod Roller

Steps:

Tear off a 6-inch sheet of aluminum foil. Encourage your child to use both hands to tear the resistant material.
Use both hands together to strongly crumple and squeeze the foil into a very tight, dense sphere. Focus on making it as hard as a rock!
Choose a craft stick. Decorate the stick with markers if desired. Hold the stick firmly using a comfortable grasp.
Hold the resistant foil ball steady with your helper hand. Use your dominant hand to aim and push the craft stick straight through the center of the foil sphere.
Apply strong, controlled pressure until the stick pushes all the way through to the other side of the foil ball. You have created a Foil Rod!
Repeat the process to create several Foil Rods. Challenge your child to connect them end-to-end to build a unique 3D sculpture or tower.

Safety Tip:
Constant adult supervision is required. Ensure children compress the foil tightly to avoid sharp edges. Collect all small materials immediately after play, as they pose a potential choking hazard.

Cardboard Clip Sculpture

Steps:

First, draw several straight lines or large shapes onto the cardboard using a marker.
Challenge your child to use both hands to tear the cardboard along the drawn lines. Encourage strong pulling and pressing action for maximum heavy work input.
Place the paper clips into the plastic container next to the workspace.
Take two torn cardboard pieces. Hold them together firmly with your non-dominant (helper) hand to keep them steady.
Use your dominant hand to squeeze open a paper clip using a neat pincer grasp (thumb and index finger).
Clip the paper clip onto the edges of the two cardboard pieces to connect them securely. Continue adding pieces to build a chain or a free-standing sculpture.

Safety Tip:
Constant adult supervision is required. Ensure that the child handles torn cardboard edges carefully, as they can sometimes be sharp. Collect and store all small paper clips immediately after the activity.

Tight Stick Wedge Push

Steps:

Fold an index card tightly in half lengthwise. This creates a stiff, narrow V-shaped wedge.
Press a small lump of Theraputty or stiff playdough firmly down inside the V-wedge. The putty should be resistant.
Place the loaded index card wedge flat inside the plastic container to keep it stable on the table.
Ask your child to hold the container firmly steady with their non-dominant hand (the helper hand).
Pick up one craft stick. Challenge your child to aim and push the stick straight down into the resistant putty through the narrow V-opening.
Encourage strong, controlled pushes until the putty wedge is completely filled with sticks. Pull the sticks out for a reverse challenge.

Safety Tip:
Theraputty, playdough, and craft sticks are small objects. Constant and direct adult supervision is required throughout this activity to prevent choking hazards for children in this age group.