Ripped Line Art

Ripped Line Art

Steps:

  • Secure the cardboard vertically to a wall or door at your child’s chest height.
  • Use a marker to draw several long, curvy, or zigzag lines onto the cardboard surface.
  • Give your child a piece of construction paper. Encourage them to use both hands to tear the paper into small, jagged pieces. This takes strong finger effort!
  • Drop the torn pieces into the plastic container nearby.
  • Now, use the glue bottle to draw a thick, wavy line of glue directly next to one of the marker lines.
  • Challenge your child to pick up the torn paper pieces using a neat pincer grasp. Press each piece firmly onto the wet glue line, filling the entire path.
  • Repeat this process, covering all the drawn lines with colorful ripped paper pieces.

Safety Tip:
Constant adult supervision is required. Ensure that small pieces of torn paper are not put into the mouth, nose, or ears, as they pose a choking hazard for children under five. Ensure the vertical board is stable and secured well.

Squeeze and Slot Cups

Squeeze and Slot Cups

Steps:

  • Adult Prep: Take a sturdy cardboard box and secure the lid shut with masking tape. Use scissors to cut one very narrow, tight slot (about 3 inches long) into the top center of the box.
  • Give your child the paper cups. Challenge them to use both hands to squeeze and crumple each cup as flat and stiff as possible. Encourage them to press hard to feel the crunch!
  • Pick up one flat, crumpled cup. Ask your child to hold the prepared box firmly with their helper hand to keep it steady on the table.
  • Challenge your child to aim the stiff edge of the cup into the narrow slot. They must use a strong, controlled push to send the crushed cup completely inside the box.
  • Repeat this crushing and slotting process until all the paper cups have been successfully posted inside the resistant box.

Safety Tip:
Constant adult supervision is required. Ensure that the cardboard box is stable and cannot tip over when the child applies pushing force. Adults must handle the scissors when cutting the resistant slot.

Stick Drop Loader

Stick Drop Loader

Steps:

  • Ask an adult to cut a small, sturdy rectangle from the cardboard. Use scissors to cut 4 to 6 very tight, narrow slits (about 1 inch long) across the cardboard surface.
  • Place the cardboard target vertically against a wall or laid flat on the table. Place the pom-poms and craft sticks nearby.
  • Challenge your child to pick up one pom-pom using only their thumb and pointer finger (pincer grasp).
  • Carefully hold the pom-pom and push one end of the craft stick into it until the pom-pom is firmly loaded onto the tip of the stick. This is tricky!
  • Hold the cardboard steady with the helper hand. Use the dominant hand to aim and push the loaded craft stick straight through the resistant slot.
  • The goal is to feel the push and send the loaded stick completely inside the target. Repeat until all the slots are full.

Safety Tip:
Craft sticks are small and pom-poms are choking hazards. Constant, direct adult supervision is required throughout this activity.

Cardboard Crunch Slot

Cardboard Crunch Slot

Steps:

  • Adult Prep: Use masking tape to fully cover the opening of the plastic container. Cut one very narrow, tight slot (about 1.5 inches long) in the center of the taped lid.
  • Give your child a piece of firm cardboard. Encourage them to use both hands to tear the cardboard into small, jagged, postage stamp-sized pieces. Tearing this resistant material is heavy work!
  • Ask your child to hold the prepared container firmly with their helper hand to keep it stable on the table.
  • Pick up one torn, rough cardboard piece. Aim the piece at the narrow slot and turn it until it fits just right.
  • Use a strong, steady push with the fingertips to send the cardboard piece completely inside the container. Repeat until all the torn pieces are posted!

Safety Tip:
Cardboard scraps and masking tape are potential choking hazards. Constant, direct adult supervision is required throughout this activity. Ensure the child remains seated and does not put materials near their mouth.

Resistant Rip Mural

Resistant Rip Mural

Steps:

  • Secure a large sheet of cardboard vertically onto a wall or door using masking tape.
  • Place several long strips of masking tape horizontally across the cardboard, sticky side OUT, creating several large, sticky ‘target zones’ or frames.
  • Give your child a large, flat piece of thick cardboard.
  • Challenge your child to use both hands to tear the thick cardboard into small, jagged pieces (this requires strong effort!).
  • Encourage them to pick up one torn piece and firmly press it onto the vertical sticky target, filling the frames to create a textured mural.

Safety Tip:
Ensure the vertical cardboard surface is stable and cannot fall or slide during the activity. Always supervise young children to ensure they do not attempt to ingest torn cardboard or masking tape pieces.