Pipe Cleaners - Page 3 of 14

Cardboard Tunnel Connectors

Steps:

Use markers to draw several long strips (about 1 inch wide) onto the sturdy cardboard.
Challenge your child to use both hands to roll one cardboard strip tightly into a narrow tube or ‘tunnel.’ Secure the tube seam completely with masking tape.
Repeat this process until you have four or five finished cardboard tubes. Encourage tight rolling for resistance.
Take two pipe cleaners and twist them together tightly to create one stiff, thick connector stick. Repeat this step for each join you plan to make.
Ask your child to hold one cardboard tube firmly steady with their helper hand. Push one stiff connector halfway into the end of the first tube.
Pick up a second cardboard tube. Use a strong, controlled push to slide the second tube onto the exposed end of the connector. Continue joining the tubes to build a long, rigid tunnel structure.

Safety Tip:
Constant and direct adult supervision is required. Pipe cleaners are small materials and pose a choking hazard for children who still place objects in their mouths. Adults should manage the scissors for cutting the cardboard strips.

Heavy Paper Link Builders

Steps:

Tear the index cards into strips (about 1 inch wide). Encourage strong, controlled pulls for heavy work input.
Take one paper strip. Roll it tightly around a marker or a pencil, creating a dense cylinder. Slide the marker out.
Secure the dense paper cylinder tightly by wrapping masking tape completely around it. Press hard to create a firm ‘building block.’
Use markers to draw small connection dots onto the center of each paper block. Aim for four dots per block.
Pick up one pipe cleaner. Hold the first paper block steady with your helper hand.
Push the stiff pipe cleaner straight through one of the marked dots. Aim the pipe cleaner and thread it through a second block to link them. Twist the ends to secure the connection.

Safety Tip:
Constant and direct adult supervision is required. Small pieces of paper, masking tape, and cut pipe cleaners pose a significant choking hazard for children who still place objects in their mouths. Ensure materials are used only as intended.

Layered Cardboard Pin Weave

Steps:

Prep the surface by taping two Index Cards tightly together. Secure this layered card firmly onto a piece of Cardboard using Masking Tape.
Use a Marker to draw 8 to 10 small target dots across the layered card. Ensure the targets are spaced out.
Challenge your child to hold the cardboard base steady with their helper hand to stabilize the work area.
Pick up one Q-Tip using a strong pincer grasp. Aim the Q-Tip at a target dot.
Use a strong, controlled push to pierce the Q-Tip completely through the resistant layered cards and into the cardboard base. This takes effort!
Once all dots are pierced, gently remove the Q-Tips. Pick up a stiff Pipe Cleaner and thread it through the newly created holes to weave a colorful pattern.

Safety Tip:
Constant and direct adult supervision is required. Q-Tips and cut pipe cleaner pieces are small materials and pose a potential choking hazard for young children. Adults should manage the scissors for preparation.

Tight Band Tunnel Clip

Steps:

Adult Prep: Twist 4 to 5 pipe cleaners tightly into small, dense resistance loops. Use masking tape to secure the paper roll upright onto the center of the cardboard base.
Secure the loops by clipping them firmly onto the top edge of the paper roll using a few clothespins. Ensure the bands are taut and resistant.
Challenge your child to sit stably and hold the cardboard base firmly steady with their helper hand to stabilize the work.
Pick up a clothespin. Encourage a strong, full squeeze to open it wide.
Aim the open clothespin and clip it onto the paper roll, positioning it directly underneath one of the tight pipe cleaner bands. Feel the effort!
Repeat the squeezing and clipping until the entire visible surface of the paper roll is covered in colorful clothespins.

Safety Tip:
Constant and direct adult supervision is required. Pipe cleaners and clothespins are small objects and pose a significant choking hazard for children who still place objects in their mouths. Ensure materials are collected immediately after play.

Tight Coil Tunnel Twist

Steps:

Adult Prep: Cut an index card in half. Cover one half completely with aluminum foil, crimping the edges tightly underneath. Secure this foiled card flat onto a sturdy piece of cardboard using masking tape.
Use a marker tip or pen to poke 5-6 small starter holes into the foil surface. These holes should be slightly smaller than the pipe cleaners.
Encourage your child to twist the pipe cleaners tightly around their finger or a pencil to create small, dense, stiff coils. This builds hand strength!
Ask your child to hold the stable cardboard base firmly steady with their helper hand (proximal stability).
Pick up one finished coil with a strong pincer grasp (thumb and pointer finger). Aim the coil at a starter hole.
Use a strong, continuous twisting motion (like screwing in a lightbulb) to turn the coil. Screw the stiff coil into and through the resistant foil and cardboard base until it is fully embedded. Repeat until all holes are filled.

Safety Tip:
Constant and direct adult supervision is required. Pipe cleaners are small materials and, especially when cut or tightly coiled, pose a choking hazard for children who still place objects in their mouths. Collect all pieces immediately after play.