Felt Resistance Wall

Felt Resistance Wall

Steps:

  • Adult Prep: Cut a sturdy rectangle from the cardboard. Cut 5 to 6 narrow strips of felt, about 1 inch wide.
  • Help your child glue the felt strips vertically onto the cardboard. Leave a very narrow gap between each felt strip to create resistant channels.
  • Once the glue is completely dry, have your child hold the cardboard firmly with their helper hand to keep the wall steady.
  • Challenge your child to pick up a craft stick. Push the stick straight through one of the narrow felt channels. This requires controlled force.
  • Continue inserting all the sticks into the wall, working to keep the cardboard from tipping or moving during the push.
  • When finished, gently pull the sticks out (working those muscles again!) and repeat the building process.

Safety Tip:
Maintain constant adult supervision, especially during the preparation phase involving scissors and glue. Ensure the child pushes the sticks away from their face and body to prevent accidental poking.

Stick Bridge Clip

Stick Bridge Clip

Steps:

  • Prep the “bridge” by using masking tape to secure 5 to 7 craft sticks in a row onto the underside of a sturdy, stable table (or a sturdy chair seat).
  • Place the pile of clothespins within easy reach on the floor beneath the table.
  • Challenge your child to lie on their back on the floor, directly under the table, facing the craft sticks. This is the starting position.
  • Encourage your child to reach up and squeeze open one clothespin at a time. They must aim carefully to clip the pin onto the ‘bridge’ (the craft stick).
  • Continue until every stick is covered in colorful clothespins. To repeat, they can clip them all off and start again!

Safety Tip:
Maintain constant adult supervision. Clothespins are small objects and pose a potential choking hazard for children who might still place items in their mouths. Ensure the table used is stable and cannot tip over during the activity.

Sticky Bean Rescue

Sticky Bean Rescue

Steps:

  • Take a handful of Theraputty and hide the dry beans deep inside it. Mash the putty into a firm ball.
  • Press the putty firmly into the bottom of the plastic container. This keeps the sticky base steady for the rescue mission.
  • Pick up the tongs. Use them to carefully grip one bean at a time and pull it straight out of the sticky putty.
  • Transfer the rescued beans into a separate pile on the table. Count how many beans you saved!
  • If a bean is too deep or stubborn, use a craft stick to gently loosen it from the putty before trying again with the tongs.

Safety Tip:
Beans and Theraputty are small objects. Maintain constant adult supervision during this activity, as these materials pose a choking hazard for children under five. Ensure the child washes hands after using the putty.

Plate Spin Targets

Plate Spin Targets

Steps:

  • Use markers to draw 4-6 small, bright dots (targets) randomly across the surface of the paper plate.
  • Flip the plate over. Use masking tape to secure a craft stick firmly to the center back as a spin handle.
  • Have your child place the plate on the table. They use one hand to grasp the craft stick handle.
  • Challenge your child to spin the plate quickly using their hand (practicing forearm rotation).
  • While the plate is spinning, they must try to quickly tap the center of a colored dot using the pointer finger of their other hand.
  • Try switching hands! Use the non-dominant hand to spin and the dominant hand to tap the moving targets.

Safety Tip:
Ensure the plate and handle are securely fastened. Supervise closely to ensure the child keeps their fingers clear of the spinning parts to avoid minor scrapes.

Card Flipper Launch

Card Flipper Launch

Steps:

  • Hold the index card firmly with your helper hand. Cut 3 short, narrow slits across the center of the card using scissors. Keep the slits straight and tight.
  • Take a craft stick (the lever). Carefully push the stick through all three narrow slits. The stick should bend the card into a slight spring shape.
  • Set the lever structure down flat on the table. Place a bead onto the end of the craft stick using your thumb and pointer finger (pincer control).
  • Hold the index card base steady with your helper hand. Use one finger from your dominant hand to press the craft stick down slightly. Quickly release it to launch the bead toward the container target.

Safety Tip:
Beads are very small and pose a significant choking hazard. Close adult supervision is required throughout the entire activity. Ensure all small materials are collected and stored safely after play.